Want to learn more about the fields you capture on the Obzervr Capture app?
Data is commonly collected using checklists, service sheets or forms. These are usually checklists which must be completed throughout a job. A checklist can usually be broken down into Task Lists, Field Measurements and Groups. Let’s check out what a Task List, Field Measurement and Groups look like.
How to fill out the Assignment with different Field type?
- Open the Obzervr Capture app, select an Assignment and select the Work tab.
- You will see the Field Measurements option and if you click on it, there are Fields separated by Sections.
- Each field can have one of the following data types:
- Numeric range – green is in the range and red is out of range. This is an exceedance and will alert the Obzervr Administrator. By providing a range of acceptable field measurement, it prompts users to check their measurement or act proactively. These field measurements use a Unit of Measurement (UOM), upper and lower boundary value. i.e. pH (from 1 – 14) or 240V AC UPS Inverter 11BRU10 (from 0 – 100%)
- Tiles – select the box to choose your answer i.e. Underfloor area ventilation fans running. i.e. OK or NOT OK.
- Drop downs – select your answer from the list of options i.e. Reason field measures not taken.
- Date – add a date for the field measurement i.e. Installation date
- Time – add time for the field measurement i.e. SCADA panel time
- Notes – write a description for your observation i.e. Local Bore Name or Property Name
- Signature/Drawing – useful for instances where you need to sign-off that you’ve completed the work i.e. Control room sign-off
- There are also some general features which each field measure has:
- Filter for Done or Not Done measures. This will allow you to quickly determine which fields need to be actioned.
Figure 2: How to fill in the data for different field types
How to Complete an Assignment?
Click on an Assignment to open it.
If there is the Plan phase in the Assignment, you will see the Plan page first.
If there is no Plan phase in the Assignment, you will see the Work page.
Swipe left or click to access the Assignment Overview page of the Assignment.
- Click on the Group you want to start (if there are multiple Groups in the Phase).
If there are Prerequisite Groups, you need to complete those Groups first.
If there are Compulsory Groups, you need to complete those Groups so you can complete the Assignment.
Figure 1: Assignment with and without Plan phase and Prerequisite Group
- Click on the Section you want to start (if there are multiple Sections in the Group).
Click on Field Measurement. Enter data in all the fields. When data is entered in an Assignment, the status of the Assignment is changed from Assigned to In Progress and the timestamp with the do-er avatar will be recorded under the FIeld Measurement (FM).
Figure 2: Timestamp recorded
Once you have entered data in all the fields in the Assignment, you are ready to Complete an Assignment.
To Complete an Assignment, navigate back to the Assignment List (or My Work page)
Click the Assignee Avatar to open More Options menu bar at the bottom of the page.
Select Complete from the More Options taskbar.
Figure 3: Mark an assignment as complete
The status of the Assignment will change to Completed.
Notification of Assignment Completion will appear on the screen.
Sync to save your data.
A Manager User will be able to view that your Assignment has been Completed on the Manager Web Portal.
So that's the nuts and bolts of Obzervr Capture!
Want to hear more about Obzervr? Check out our support videos, website (www.obzervr.com), or social media pages (LinkedIn, Twitter or Facebook). Leave a comment below and click to let us know if this article was helpful!